|
The VigorTalk for DrayTEL is a palm-sized device which lets you connect any regular telephone to your broadband router (or any other Internet-enabled Ethernet connection) to make phone calls using your broadband connection via the DrayTEL Voice-over-IP (VoIP) service. The VigorTalk allows you to make and receive free VoIP calls to any other SIP compatible device (software or hardware) worldwide - the other party does not have to be a DrayTEL user.
Additionally, through DrayTEL, you can make calls to any regular phone line or cellphone worldwide, at low DrayTEL rates, starting at just a penny per minute for calls to the UK, Europe, USA and Australia! (see DrayTEL Rates). You can receive calls too, of course - DrayTEL will allocate you your own real telephone number. The VigorTalk's Ethernet interface connects to an Ethernet ("RJ45") socket on your existing broadband router (or switch).
The calls are carried via your internet connection so your regular phone line remains free for other people and calls. It's just like having an extra phone line. The VigorTalk is small - a little bigger than a pack of cards, so it can be easily transported and taken anywhere where you might find a Ethernet Internet connection (normally a broadband router or LAN). Wherever you plug it in, you can then make and receive calls on your regular DrayTEL phone number - people need never know you're somewhere else! The VigorTalk was awarded VNULabs 'product of the week' - hear their Webcast here.
The VigorTalk is self-contained - it does not need a PC connected to use it, unlike USB or other PC-connected devices. Other VoIP services such as Skype™ and MSN Messenger™ always need a PC connected and switched on - the VigorTalk can be connected and used anywhere you have an Ethernet Internet connection (or router!).
The VigorTalk can be configured from your telephone handset. Simple voice prompts (yes, the VigorTalk talks to you in English!) guide you through setup, which takes less than a minute typically.
Features :
- Analogue phone adaptor for VoIP
- Connects to the DrayTEL SIP Service/Gateway
- Set up from the handset with interfactive voice menus
- Standalone, portable device - No PC required.
- Take it anywhere you have an Ethernet Internet connection.
- Works behind firewalls and 'NAT routers'
- Easy to set up with Interfactive Voice prompts - no PC required.
- 10/100BaseT Ethernet Interface to your existing broadband router/internet feed
- Compatible with any standard analogue telephone or cordless phone
- Mains powered (via AC/DC adaptor, supplied)
Technical Specification of VOIP features :
Toll-quality voice quality
Industry Standard VOIP & Compression Protocols : Codecs : G.711 A-Law/u-Law & G.729A/B Adjustable RX/TX Gain G.168 Line Electrical Echo cancellation Jitter Buffer (125ms)
Compatible with the DrayTEL VoIP Service
Toll Quality Voice with QoS implementation for VOIP including : Low latency queuing (LLQ) Policy-based routing Random Early Detection
Sockets : 1 X RJ45 (Ethernet 10/100BaseT), 1 X RJ11 (Phone), 1 X Power.
Warranty : 12 Months manufacturer's RTB warranty
Box Contents : VigorTalk for DrayTEL (main unit) AC/DC PSU with UK plug. Input 220-240VAC RJ-45 Ethernet Cable (1.6M) RJ-11/BT phone socket Adaptor Printed Quick Setup Guide
Click Here for Technical Support
Click Here for Related Links
Click Here for DrayTek recommendations
DISCLAIMER: "All support for the product is provided by DrayTEL. The purchase price is for the physical hardware only; DrayTEL service is provided separately (basic DrayTEL service is free). The VigorTalk for DrayTEL works only with the DrayTEL service. "
|